Cast-In-Place Mix Help
Need help with our Cast-in-Place concrete mix? Find expert guidance on mixing, pouring, and finishing for a flawless concrete project. Get support from Concrete Lab today!
Video Guides
Video Guides
PDF Guides
Mould Building
Basic Mould Construction Guide
Cast In Place Mix Mould Building Guide
Waterfall Edge Guide
Cast In Place Mix Waterfall Edge Mould Building Guide
Cast-In-Place Mix Product Use
Mixing Instructions
Cast In Place Mix - Mixing Guide
Casting or Pouring Instructions
Cast In Place Mix - Casting Guide
Smoothing Paste Application
Concrete Lab Smoothing Paste Instructions
Cast-In-Place Mix Sanding Instructions
Cast In Place Mix - Sanding & Sealing Guide
Mould Release Agent Application Instructions
Water-Based Mould Release Instructions
Universal Primer Application Instructions
Concentrated Universal Primer Instructions
Sealer & Wax Application
Sealer Mixing & Application Instructions
Concrete Lab Sealer - Mixing & Application Instructions
Wax Application
Concrete Wax Instructions
Application
1. Apply wax by rubbing a small amount on the surface of the concrete using the cloth. Ensure good coverage.
2. Using a lint-free/microfibre cloth work the wax into the concrete. To aid the workability of the wax a hairdryer or heat gun can be used but care should be taken not to heat the concrete too much.
3. After 15 minutes buff the wax to a sheen. Don't worry if a layer of excess wax remains on the surface of the concrete as this will wear off in around 24 hours.
PLEASE NOTE: The wax is now supplied in a lidded tin rather than a bar as shown in the photograph and video.
Application Video
Product MSDS - PDF Download