Cast-In-Place Mix Help
Need help with our Cast-in-Place concrete mix? Find expert guidance on mixing, pouring, and finishing for a flawless concrete project. Get support from Concrete Lab today!
Video Guides
Video Guides
PDF Guides
Mould Building
Basic Mould Construction Guide
Download: Cast In Place Mix Mould Building Guide
Cast In Place Mix Mould Building Guide
Waterfall Edge Guide
Download: Waterfall Edge Mould Building Guide
Cast In Place Mix Waterfall Edge Mould Building Guide
Cast-In-Place Mix Product Use
Mixing Instructions
Download:Cast In Place Mix - Mixing Guide
Cast In Place Mix - Mixing Guide
Casting or Pouring Instructions
Download:Cast In Place Mix - Casting Guide
Cast In Place Mix - Casting Guide
Smoothing Paste Application
Download:Concrete Lab Smoothing Paste Instructions
Concrete Lab Smoothing Paste Instructions
Cast-In-Place Mix Sanding Instructions
Download: Cast In Place Mix Sanding & Sealing Guide
Cast In Place Mix - Sanding & Sealing Guide
Mould Release Agent Application Instructions
Download: Water-Based Mould Release Instructions
Water-Based Mould Release Instructions
Universal Primer Application Instructions
Download: PDF instructions
Concentrated Universal Primer Instructions
Sealer & Wax Application
Sealer Mixing & Application Instructions
Download: Mixing & Sealing Instructions
Concrete Lab Sealer - Mixing & Application Instructions
Wax Application
Download:
Concrete Wax Instructions
Application
1. Apply wax by rubbing a small amount on the surface of the concrete using the cloth. Ensure good coverage.
2. Using a lint-free/microfibre cloth work the wax into the concrete. To aid the workability of the wax a hairdryer or heat gun can be used but care should be taken not to heat the concrete too much.
3. After 15 minutes buff the wax to a sheen. Don't worry if a layer of excess wax remains on the surface of the concrete as this will wear off in around 24 hours.
PLEASE NOTE: The wax is now supplied in a lidded tin rather than a bar as shown in the photograph and video.
Application Video
Product MSDS - PDF Download