Video Guides

Artboard-66
Artboard-66

Video Guides

Artboard-66
Artboard-66

PDF Guides

Mould Building

Mould Building & Casting Instructions

GFRC Precast Concrete Mould Building and Casting Instructions

GFRC Mix Product Use

Mixing Instructions

GFRC Precast Concrete Mixing Instructions

Casting or Pouring Instructions

GFRC Precast Concrete Mould Building and Casting Instructions

Etch & Clean System Instructions

Concrete Lab Etch and Clean Instructions

YouTube Video

Smoothing Paste Application

Concrete Lab Smoothing Paste Instructions

Sealer & Wax Application

Sealer Mixing & Application Instructions

Concrete Lab Sealer - Mixing & Application Instructions

Wax Application

Concrete Wax Instructions

Application

1. Apply wax by rubbing a small amount on the surface of the concrete using the cloth. Ensure good coverage.

2. Using a lint-free/microfibre cloth work the wax into the concrete. To aid the workability of the wax a hairdryer or heat gun can be used but care should be taken not to heat the concrete too much.

3. After 15 minutes buff the wax to a sheen. Don't worry if a layer of excess wax remains on the surface of the concrete as this will wear off in around 24 hours.

PLEASE NOTE: The wax is now supplied in a lidded tin rather than a bar as shown in the photograph and video. 

Application Video

 

Product MSDS - PDF Download