It is approx 1 to 2mm. It is very thin! However do bear in mind that if you want to apply microcement to a rough surface such as an old concrete floor then you will want to get that nice and smooth first with something like a self-levelling compoun, so you don't waste too much microcement going over pits and divots in the substrate surface.

Yes of course! For standard walls, e.g. brickwork/blockwork/plasterboard, we recommend that this is plastered orr skimmed first to give a nice smooth surface to go over.

Yes it can. The walls/floors will require a bit more prep though to get them ready to receive the microcement. Send us an email or give us a call for more guidance.

Our microcement comes in off-white, light grey, mid grey and dark grey, but you can also add dyes to create your own bespoke colours.

Here is a link to the dyes we sell.

Have a look at our instructions here which give the best substrates to apply the microcement to - Instructions Link.

Each pack of microcement comes with 2 coats, each coat covering 1,5 or 10 square metres.

We recommend you add 10-15% on top of the area you want to cover so you don't run out of material in the middle of your project.

The GFRC Worktop Mix can be cast as thin as 18mm. We don't recommend any thinner than this.

It is 0.6 square metres at 18mm thickness.

Use our handy calculator! Just enter your details and our calculator will work out the rest - GFRC Worktop Mix Calculator

We have off-white, light grey, mid grey and dark grey. To customize your colours you can add dye to the mix, whether that be to the off-white to create something completely different like pink, or add black dye to the dark grey mix to create a really dark coloured concrete.

Check out our dyes here - Concrete Dyes

You can also buy our standard colour samples here for a small fee.

Check out our help section here - GFRC Worktop Mix Support Section