You have no items in your shopping cart.
Concrete Lab Mould Release Agent has been developed using the latest water soluble polymer technology to produce an environmentally friendly and highly efficient release material for concrete formwork on site. It is ready to use and particularly suited to both indoor and outdoor use on faced sealed plywood, melamine, steel moulds and other impervious formwork materials.
Apply thinly, by spray, brush or swab prior to each concrete pour. Application should be a minimum of 1 hour before pouring, for the excess water to evaporate off and the release film to be properly established. With first application to new formwork a second light coat may be required. On vertical forms any excess material accumulating at the bottom of the form should be removed. On untreated timber surfaces additional coats may be required for first use.
Do not use when temperatures are below freezing.
TIP: Check out the pdf's on the Premix kits page for instructions on how to build moulds. We recommend using melamine for the base, melamine strips for the formwork (external formwork, hob and sink openings etc, plus melamine blocks to support the forms). We use a hot melt glue gun to build our moulds. It is also common to put a 4-8mm round on seen edges of a worktop or table which we create using silicone inside our mould.
A thin coating to give a coverage rate of 30 to 50m2 per litre depending upon surface porosity and texture. Protect from rain when still wet.
The release agent is a water based product and should be protected from frost. Containers must be kept sealed after use. The product may require mild agitation before use if stored for more than 6 months.
Shelf life- In excess of 12 months in sealed containers, use within 2 months of opening. Roll or agitate containers after prolonged storage.
Health and Safety
Download Material Safety Data Sheet for this product.
SHIPPING RATES & DELIVERY TIMES
Shipping charges for your order will be calculated and displayed at checkout. Concrete Lab ships to addresses within the UK. For addresses in Europe please email us at firstname.lastname@example.org.
Delivery within the UK is generally next day, provided orders are placed prior to 12 noon. For large orders which require pallet delivery, orders are usually delivered in two days. Delays can occasionally occur and this should be factored when placing an order.
Delivery to Europe can take up to 1 week.
Delays can occasionally occur and this should be factored when placing an order.
SHIPMENT CONFIRMATION & ORDER TRACKING
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
CUSTOMS, DUTIES AND TAXES
Concrete Lab is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).
Concrete Lab is not liable for any products damaged or lost during shipping. If you received your order damaged, please contact the shipment carrier to file a claim.
Please save all packaging materials and damaged goods before filing a claim. International Shipping Policy
We currently do not ship outside the UK and Europe.
Our Return & Refund Policy provides detailed information about options and procedures for returning your order.