Water-Based Mould Release Agent
Pickup available at Unit C3 Station Approach Industrial Estate
Usually ready in 2-4 days
Concrete Lab Mould Release Agent has been developed using the latest water soluble polymer technology to produce an environmentally friendly and highly efficient release material for concrete formwork on site. It is ready to use and particularly suited to both indoor and outdoor use on faced sealed plywood, melamine, steel moulds and other impervious formwork materials.
Application
Apply thinly, by spray, brush or swab prior to each concrete pour. Application should be a minimum of 1 hour before pouring, for the excess water to evaporate off and the release film to be properly established. With first application to new formwork a second light coat may be required. On vertical forms any excess material accumulating at the bottom of the form should be removed. On untreated timber surfaces additional coats may be required for first use.
Do not use when temperatures are below freezing.
TIP: Check out the pdf's on the Premix kits page for instructions on how to build moulds. We recommend using melamine for the base, melamine strips for the formwork (external formwork, hob and sink openings etc, plus melamine blocks to support the forms). We use a hot melt glue gun to build our moulds. It is also common to put a 4-8mm round on seen edges of a worktop or table which we create using silicone inside our mould.
Coverage
A thin coating to give a coverage rate of 30 to 50m2 per litre depending upon surface porosity and texture. Protect from rain when still wet.
Storage
The release agent is a water based product and should be protected from frost. Containers must be kept sealed after use. The product may require mild agitation before use if stored for more than 6 months.
Shelf life- In excess of 12 months in sealed containers, use within 2 months of opening. Roll or agitate containers after prolonged storage.
Health and Safety
Download Material Safety Data Sheet for this product.
Instructions
Concrete Lab Mould Release Agent has been developed using the latest water soluble polymer technology to produce an environmentally friendly and highly efficient release material for concrete formwork on site. It is ready to use and particularly suited to both indoor and outdoor use on faced sealed plywood, melamine, steel moulds and other impervious formwork materials.
Application
Apply thinly, by spray, brush or swab prior to each concrete pour. Application should be a minimum of 1 hour before pouring, for the excess water to evaporate off and the release film to be properly established. With first application to new formwork a second light coat may be required. On vertical forms any excess material accumulating at the bottom of the form should be removed. On untreated timber surfaces additional coats may be required for first use.
Do not use when temperatures are below freezing.
TIP: Check out the pdf's on the Premix kits page for instructions on how to build moulds. We recommend using melamine for the base, melamine strips for the formwork (external formwork, hob and sink openings etc, plus melamine blocks to support the forms). We use a hot melt glue gun to build our moulds. It is also common to put a 4-8mm round on seen edges of a worktop or table which we create using silicone inside our mould.
Coverage
A thin coating to give a coverage rate of 30 to 50m2 per litre depending upon surface porosity and texture. Protect from rain when still wet.
Storage
The release agent is a water based product and should be protected from frost. Containers must be kept sealed after use. The product may require mild agitation before use if stored for more than 6 months.
Shelf life- In excess of 12 months in sealed containers, use within 2 months of opening. Roll or agitate containers after prolonged storage.
Health and Safety
Download Material Safety Data Sheet for this product.
Product Contents
Quantities & Coverage
Shipping
Domestic Shipping Policy:
All orders are processed within 1-3 business days. Orders are not shipped or delivered on weekends or holidays. Once processed, orders are shipped within 2 to 5 days.
Delays can occasionally occur and this should be factored when placing an order.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
SHIPPING RATES & DELIVERY TIMES
Shipping charges for your order will be calculated and displayed at checkout.
Concrete Lab ships to addresses within the UK. For addresses in Europe please email us at info@concretelab.co.uk.
Delivery to Europe can take up to 1-2 week.
Delays can occasionally occur and this should be factored when placing an order.
SHIPMENT CONFIRMATION & ORDER TRACKING
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
CUSTOMS, DUTIES AND TAXES
Concrete Lab is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).
DAMAGES
If you received your order damaged, please contact as soon as possible.
International Shipping Policy
We currently do not ship outside the UK and Europe unless by prior arrangement.
RETURNS POLICY
Our Return & Refund Policy provides detailed information about options and procedures for returning your order. This can be found at the bottom of the page.