Are Microcement Floors Slippery?

Microcement floors are not inherently slippery, but like most hard surfaces, slip resistance depends on the surface texture, the sealer used, and whether the floor is dry or wet.

This is especially important in areas such as bathrooms, wet rooms, kitchens, and entrance halls.

What affects slip resistance on a microcement floor?

Several factors influence how slip-resistant a microcement floor feels:

• The texture of the finished surface
• The type of protective sealer applied
• Whether the floor is dry or wet
• Cleaning residue or soap build-up

A very smooth, highly polished finish with a glossy sealer will generally be more slippery when wet than a subtly textured finish with a satin or matt sealer.

Are microcement floors slippery when wet?

Like tiles, concrete, or polished stone, microcement can become more slippery when wet — particularly if the surface is very smooth.

For wet areas, slip resistance is managed by:

• Controlling the final surface texture
• Choosing the appropriate sealer finish
• Using anti-slip additives where required

Can microcement be made non-slip?

Yes. Microcement floors can be made more slip-resistant by adjusting the system rather than relying on the microcement alone.

Common approaches include:

• Leaving a subtle trowel texture rather than over-polishing
• Using a matt or satin sealer instead of a gloss finish
• Incorporating anti-slip additives into the final sealing layers

When finished with our sealer system, microcement floors can achieve good slip resistance suitable for domestic environments, including kitchens and bathrooms, provided the surface texture and sealer finish are selected appropriately.

Slip resistance is influenced by the final texture and sealer choice rather than the microcement material alone.

Is microcement suitable for bathrooms and wet rooms?

Yes — microcement floors are commonly used in bathrooms and wet rooms when installed correctly. Waterproofing, detailing, and slip resistance should all be considered as part of the overall system.

In wet areas, it’s important to think beyond just the finish and consider how water is managed across the entire floor.

DIY tips to improve slip resistance

• Avoid over-polishing the final surface
• Choose a matt or satin sealer for wet areas
• Discuss anti-slip options before sealing
• Clean using pH-neutral products to avoid residue build-up

Microcement slip resistance FAQs