Trinic Tough Finish (TF-2) is a specially designed renewable finish designed to replace traditional floor and worktop protectors and offer protection far beyond the norm. We saw a need for a finish that is more durable and lasts longer to help reduce maintenance costs, add to the life of traditional coatings such as acrylics, epoxies and urethanes. BenefitsAvailable in Natural Matte or High Gloss (can be blended for a satin)Use Indoor or Outdoors / UV stable will not yellowIncrease abrasion resistanceIncrease stain resistanceCan be used over most other sealers/ coatingsEasy application / Spray / Roll/ MopCan be spot repaired / Buffed / Re-applied / No stripping neededAnti-skid version available for floors/ stairs and wet areas.Eliminates the need for wax.Surface PreparationSurface must be clean and free of debris, oils, loose sealer or coatings, soap and cleaning residues must be removed prior to application. A test area application is suggested.ApplicationOnce surface is clean TF-2 can be applied by pump spray and back roll with a short nap roller or use a paint pad or microfiber mop. For countertops a microfiber pad works well. Spread a thin layer of TF-2 following the suggested coverage rate and allow to dry for about 4-5 hours. Fans can be used to circulate air and expedite the curing process. Avoid over application it will cause a decrease in abrasion resistance and longer cure time.Cure RateSurface should be ready for light traffic in about 4 hours, full cure is 24 hours.