Cast-In-Place Project Kit Builder
Build A Cast-In-Place Concrete Project Kit using our handy kit builder.
Build Your Own Kit
Add All The Products You'll Need For Your Project
Scroll down and add a product or products from each section.
Make Sure Your Mould Is Prepared Properly
Our Cast-In-Place Mould Prep Kit contains Mould Release Agent so your formwork will come off easily.
It also contains Primer which you can apply to the parts of your mould that will stay in place.
Kit zur Vorbereitung von Ortbetonformen
You will only need one pack for a normal sized project.
Fill Any Pinholes In Your Concrete
Sometimes there will be the odd unavoidable pinhole or void which is all part of making concrete. Our colour-matched smoothing paste is perfect for filling these in.
Glättungspaste für Betonarbeitsplatten
Each Pack covers 3 to 5 Square Metres.
Reinforcement
Our concrete mix already contains glass fibres but around any openings (e.g. hob, sink bbq etc.) you will need approx 4 reinforcement bars.
Glasfaser-Verstärkungsstäbe für Arbeitsplatten
Add 4 per opening
Don't Forget To Seal Your Concrete
Concrete is very porous. So to make sure your concrete doesn't stain then you will need a sealer.
Each Sealer Pack covers 10 square metres.
Wax On, Wax Off
Add a lovely sheen to your new concrete. Just like wood, concrete can be nourished and further protected with a coat of wax every so
Betonwachs von Rhoose Point Remedies
One pack goes miles!