Our Concrete Sink Mould Insert Kit contains the following;

Moisture Resistant MDF Sink Insert Parts
Body Filler
Mould Resin
Waste Hole
Mould Release Wax

The kit is easy to assemble and will form the inner part of a concrete sink mould.

The kits come in a range of sizes as follows;

Small - 300 x 300 x 100 mm (square)

Medium - 400 x 400 x 100mm (square)

Large - 400 x 500 x 150 mm (rectangle)

To make your own sink we recommend you watch the video tutorial series prior to starting the project. We also recommend you use the products listed in the collection below;

https://concretelab.co.uk/collections/concrete-sinks

To manufacture a basic rectangular concrete sink you will also need to source the outer parts of the mould. We recommend using 15mm melamine board for the outer mould parts which should be available from most good DIY stores.

Below are links to PDFs of the parts for each size sink;

Large Sink - PDF - Large Rectangular Concrete Sink Size 460 x 560 x 175mm with 30mm thick walls

Medium Sink - PDF - Medium Square Concrete Sink 460 x 460 x 125mm with 30mm thick walls

Small Sink - PDF - Small Square Concrete Sink 360 x 260 x 125mm with 30mm thick walls